import babelbox-etch.tgz (thanks, bubulle)

SHA-1:b7fcbd9076903bb98474a7b6c5b4d860ece09bcd, from
<http://d-i.alioth.debian.org/pub/etch/babelbox/babelbox.tgz>

babelbox-preseed.cfg

@@ -0,0 +1,128 @@
+#### Preseed file for Babelbox
+# See installation guide for other preconfiguration options
+
+### Network configuration
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# To pick a particular interface instead:
+#d-i netcfg/choose_interface select eth1
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+d-i netcfg/dhcp_timeout string 60
+
+# If you prefer to configure the network manually, or if there's no
+# network available, then uncomment this line and check the static
+# network configuration below.
+#d-i netcfg/disable_dhcp boolean true
+
+# Static network configuration.
+d-i netcfg/get_nameservers string 192.168.99.1
+d-i netcfg/get_ipaddress string 192.168.99.42
+d-i netcfg/get_netmask string 255.255.255.0
+d-i netcfg/get_gateway string 192.168.99.1
+d-i netcfg/confirm_static boolean true
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+d-i netcfg/get_hostname string babelbox
+d-i netcfg/get_domain string unassigned-domain
+
+### Mirror settings
+d-i mirror/country string enter information manually
+d-i mirror/http/hostname string ftp.nl.debian.org
+d-i mirror/http/directory string /debian
+d-i mirror/http/proxy string
+
+### Partitioning
+# We use the largest free space available for Babelbox
+#d-i partman-auto/init_automatically_partition \
+#	select Use the largest continuous free space
+d-i	partman-auto/init_automatically_partition select %%use_biggest_free%%
+
+# You can choose from any of the predefined partitioning recipes:
+# d-i partman-auto/choose_recipe select All files in one partition (recommended for new users)
+d-i	partman-auto/choose_recipe select %%atomic_scheme%%
+
+# This makes partman automatically partition without confirmation.
+d-i partman/choose_partition select Finish partitioning and write changes to disk
+d-i partman/confirm boolean true
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean false
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string Europe/Amsterdam
+
+### Apt setup
+# When using a full CD image, we don't need a mirror
+d-i apt-setup/use_mirror boolean false
+
+# We don't need security updates for this
+d-i apt-setup/security_host string 
+
+### Account setup
+d-i passwd/root-password password r00tme
+d-i passwd/root-password-again password r00tme
+
+# Alternatively, create a normal user account.
+d-i passwd/user-fullname string Debian User
+d-i passwd/username string debian
+d-i passwd/user-password password r00tme
+d-i passwd/user-password-again password r00tme
+
+### Boot loader installation
+# Install grub to the 4th partition
+# uncomment and edit these lines:
+d-i grub-installer/bootdev  string (hd0,4)
+d-i grub-installer/only_debian boolean false
+d-i grub-installer/with_other_os boolean false
+
+### Package selection
+#tasksel tasksel/first multiselect Standard system
+tasksel tasksel/first multiselect Standard system, Desktop environment
+
+# Don't install popcon
+popularity-contest popularity-contest/participate boolean false
+
+### Finishing up the first stage install
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+### X configuration
+# X can detect the right driver for some cards, but if you're preseeding,
+# you override whatever it chooses. Still, vesa will work most places.
+#xserver-xorg xserver-xorg/config/device/driver select vesa
+
+# A caveat with mouse autodetection is that if it fails, X will retry it
+# over and over. So if it's preseeded to be done, there is a possibility of
+# an infinite loop if the mouse is not autodetected.
+#xserver-xorg xserver-xorg/autodetect_mouse boolean true
+
+# Monitor autodetection is recommended.
+xserver-xorg xserver-xorg/autodetect_monitor boolean true
+# Uncomment if you have an LCD display.
+#xserver-xorg xserver-xorg/config/monitor/lcd boolean true
+# X has three configuration paths for the monitor. Here's how to preseed
+# the "medium" path, which is always available. The "simple" path may not
+# be available, and the "advanced" path asks too many questions.
+#xserver-xorg xserver-xorg/config/monitor/selection-method select medium
+d-i	xserver-xorg/config/display/modes	multiselect	1024x768, 800x600, 720x400, 640x480
+
+#### Advanced options
+### Define scripts to be run
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+d-i preseed/early_command string /hd-media/srv/babelbox/preseed_early
+
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+d-i preseed/late_command string /hd-media/srv/babelbox/preseed_late